Category: Hall constructions

Hall system edge protection with adjustable post holder

Adjustable edge protection on hall constructions

Hall system edge protection with adjustable post holder

Adjustable post holder is used when the edge protection needs to be adjusted to different locations during the course of a project. A starting position can be set during roofing and the adjustment is easily done when wall elements are to be mounted, or when working with crown lights, hangers etc. The possibility of adjustment allows the safety to be maintained at the same high level throughout the construction process.

PRODUCTS
• Adjustable post holder
• Post 1,3 m
• Attachment
• Barrier alu 3 m
• Joint pin
• Rod 20 complete 0,5 m, 1,0 m
• Barrier bracket wedge coupler
• Double coupler swivelling
• Coupler bracket

Hall system edge protection with adjustable post holder

Edge protection on hall constructions

Installation with straight posts on hall constructions

Edge protection on hall constructions

A quite common building method of hall constructions is that the wall elements are placed past the roof and create a border, something that requires indoor drainage. As to the edge protection a solution using a straight post installed to the attachment may be the best alternative. We can offer several different post options to handle large spans.

PRODUCTS
• Barrier alu 3 m
• Joint pin
• Post 2,5 m alu
• Attachment
• Rod 20 complete 0,5 m, 1,0 m
• Barrier bracket wedge coupler
• Double coupler swivelling
• Coupler bracket

Edge protection on hall roof

Fall protection on hall building

Edge protection on hall roof

hall_system_safetyrespect_5371

Attachment fall protection steel

Attachments for concrete, steel and wood

Attachment fall protection steel

The Hall system offers several attachment alternatives that can be used for steel, concrete and glued laminated timber. The attachment is carried out either in the middle of or on the side of the beam, between two columns placed close to each other, direct in wooden beams or with casting sleeves. The brackets can be fastened either with bolts if they are to be removed at a later date, or be welded in place as permanent brackets to be used for future maintenance of roofs and facades.

PRODUCTS
• Weld nut
• Rod 20
• Pre-cast attachments

Attachment fall protection wood

Attachment fall protection concrete

hall_system_safetyrespect_5371