When you want to create a safe platform/working deck in a lift shaft you should use Platform consoles that are fastened to the inside of the shaft wall. When the platform consoles have been installed, grade timber of correct dimensions should be used to create the platform level.
• Bracket that creates flats at openings and shafts.
• Installed with console tenon.
• Maximum load 1,000 kg/console.
• Weight 1,4 kg.
Art. No. 930089
Compression post is used as for installing edge protection between concrete slabs and other situations at construction sites. Utilizing the Compression post together with Barrier and Containment net a fully covered opening can be achieved. The containment net stops debris and material from entering or exiting the floor and the Barrier acts as collective fall protection. The Compression post is easy to install by extending the inner pipe to the ceiling and then activating the compression function by a foot pedal.
• Tool free installation.
• Adjustable length 2,2-3,5 m (7’2”-11’5”).
• Tension load (FT) 100-150 kg.
• Fits with various barrier brackets.
• Hot dip galvanized.
• Weight 10,5 kg.
• EN 13374 A, OSHA 1926.502 (B).
• Delivered 50 pcs in stackable pallet.
Art.no. 913151
Joint pin barrier is used for jointing Barrier alu 3 m, as temporary edge protection on hall buildings. SafetyRespect Hall system is an edge protection developed for flat roofs and gently inclined roofs. Such an example is constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.
Art. No. 914150
Barrier alu 3 m is used when installing Hall system as temporary edge protection on hall building constructions. SafetyRespect Hall system is an edge protection developed for flat roofs and gently inclined roofs. Such an example is constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.
• Can easily be raised and lowered on the posts.
• Stable frame construction of 48,3 mm aluminium pipe.
• Integrated toe board 225 mm.
• Weight 22 kg.
• 14 pieces delivered in stacking stillage.
Art. No. 910122
Side plate is used when attaching brackets for temporary safety barriers on hall buildings. SafetyRespect Hall system is an edge protection developed for flat roofs and gently inclined roofs. Such an example is constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.
Art. no. 914155
Centre plate is used for attachment of Hall System as edge protection on hall constructions.
Art. no. 914154
Weld nut 20 is used for attachment of Hall system as edge protection on steel constructions. The system is developed for flat roofs and gently inclined roofs, such as building constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.
Weld nut 20
Art. no. 914148
Weld nut cylindrical
Art. no. 914147
Post 2,5 m alu is used when installing SafetyRespect’s Hall System to enable adjustment of the position of the edge protection. A quite common building method of hall constructions is that the wall elements are placed past the roof and create a border, something that requires indoor drainage. As to the edge protection a solution using a straight post installed to the attachment may be the best alternative. We can offer several different post options to handle large spans.
• Aluminium pipe 48,3 x 4,0 mm.
• Weight 7,8 kg.
• 100 pieces delivered in stacking stillage.
Art. no. 911121
Rod 20 complete is used when installing SafetyRespect Hall system. The system is an edge protection developed for flat roofs and gently inclined roofs. Such an example is constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.
Rod 20 complete 0,5 m – Art. No. 914156
Rod 20 complete 1,0 m – Art. No. 914157
SafetyRespect saves lives with fall protection installed on several bridges being built around Europe and North America. Our flexible attachment solutions make it possible to mount temporary edge protection on most bridge structures.
In building constructions that consists of wooden beams, the Wood beam clamp can be used as attachment for the edge protection. The bracket has integrated post lock and fits beam dimensions of 45 x 120 – 220 mm. It is designed for a flexible mounting and can be easily adjusted as needed. When the bracket has been mounted on the beams, then Post 1,3 m and Barrier 2,6 are mounted. Post foot and Clamp 550 are examples of other brackets that can be used on some bridge constructions. Posts are then mounted in the brackets and after that barriers.
PRODUCTS
• Wood beam clamp
• Post foot
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6
Product sheet
