Tag: columns

Long spans

hall_system_safetyrespect_0035

Making use of available columns or other structure elements for attachment enables work tasks on the slab to be completed freely and efficiently. The edge protection will be suspended on the columns above the working surface at a correct height, considering future work to be carried out. SafetyRespect’s Barrier alu 3 m can handle large spans and makes possible installation between columns. The Barriers are continuously jointed with Pipe joints or Pipe couplings without using any attachment on the slab. The Barriers can be raised so that they create a completely free working space required when applying a new surface layer, casting, etc.

PRODUCTS
• Barrier alu 3 m
• Joint pin
• Attachment

hall_system_safetyrespect_0025

Fall protection on hall building

Wood structures

Fall protection on hall building

In building constructions with wooden beams and columns the edge protection can be mounted with various systems and solutions, for example with Flex facade brackets. The facade bracket is directly mounted on a wooden beam with the required wood screws. When a roof protection is required, a Hall system can be installed in the wood structure. The attachment is then done by using rods.

PRODUCTS
• Facade bracket
• Hall system
• Wood screw
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6

Fall protection on wood structures

Edge protection on hall constructions

Pre-installed attachments on steel beams

beams_and_columns_safetyrespect_0075

When steel beams are used in the building construction a Welding socket with integrated post lock should be designed as an attachment of edge protection. In these cases the Welding socket is welded according to the instructions when producing the steel beams. When the beam has been lifted in place Post 1,3 m and Barrier 2,6 are mounted. The attachment of the edge protection will become both safer and faster with a pre-fabricated attachment such as this one.

PRODUCTS
• Welding socket
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6

Attachment fall protection steel

Attachments for concrete, steel and wood

Attachment fall protection steel

The Hall system offers several attachment alternatives that can be used for steel, concrete and glued laminated timber. The attachment is carried out either in the middle of or on the side of the beam, between two columns placed close to each other, direct in wooden beams or with casting sleeves. The brackets can be fastened either with bolts if they are to be removed at a later date, or be welded in place as permanent brackets to be used for future maintenance of roofs and facades.

PRODUCTS
• Weld nut
• Rod 20
• Pre-cast attachments

Attachment fall protection wood

Attachment fall protection concrete

hall_system_safetyrespect_5371