Published February 15, 2024.
The kit contains a fall protection harness that is easy to put on and take off and is light and easy to work in. The fall arrest block included has a 6 meter long steel line to enable you to move over larger surfaces without needing to change the anchor point. The block is certified for both horizontal and vertical work as well as work on sharp edges. The kit also includes a carabiner and a 1 meter steel sling. The products are supplied in a sturdy, water-resistant bag that can be carried on the back.
CONSTRUCTION KIT
Art. no. 967310
• Harness SR Body
• Block SR IKAR steel 6 m
• Carabiner alu, oval 26 kN ozone black triplock
• Lanyard steel I 100 cm 15 kN
• Gear bag 35 l SR
Since a platform has a limited work surface, there are no long lines needed for anchoring. This kit includes a fall arrest block with a 1,8 meter long band with a fall indicator. The fall arrest block is certified for both horizontal and vertical work as well as work close to sharp edges.
The harness included is easy to put on and take off and is light and easy to work in. The kit also includes a carabiner hook and a 0,6 meter anchor sling. The products are supplied in a heavy duty, water-resistant bag that can be carried on the back.
MOBILE PLATFORM KIT
Art.nr. 967300
• Harness SR Body
• Block SR IKAR textile 1,8 m
• Carabiner alu, oval 26 kN ozone black triplock
• Sling 60 cm, 22 kN
• Gear bag 35 l SR
Slab edges are present everywhere and are a common cause of fall accidents. Temporary edge protection can be installed on the slab or on the outside of the slab edge. If there are columns, they can be an alternative attachment of the edge protection.
Our solutions can easily be installed on all materials and provide flexibility when needed, as, for example, when walls are to be installed. Usually Socket base is installed at the slab edge for attaching the edge protection. The Post 1,3 m are installed in the socket base then barriers are attached.
When the barrier is in its lowest position it seals against the slab, and it can easily
be raised on the post for various kinds of work at the slab edge.
PRODUCTS
• Socket base
• Post foot
• Vertical bracket
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
• Barrier bracket 360
Centre plate is used for attachment of Hall System as edge protection on hall constructions.
Art. no. 914154
Weld nut 20 is used for attachment of Hall system as edge protection on steel constructions. The system is developed for flat roofs and gently inclined roofs, such as building constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.
Weld nut 20
Art. no. 914148
Weld nut cylindrical
Art. no. 914147
Post 2,5 m alu is used when installing SafetyRespect’s Hall System to enable adjustment of the position of the edge protection. A quite common building method of hall constructions is that the wall elements are placed past the roof and create a border, something that requires indoor drainage. As to the edge protection a solution using a straight post installed to the attachment may be the best alternative. We can offer several different post options to handle large spans.
• Aluminium pipe 48,3 x 4,0 mm.
• Weight 7,8 kg.
• 100 pieces delivered in stacking stillage.
Art. no. 911121
SafetyRespect saves lives with fall protection installed on several bridges being built around Europe and North America. Our flexible attachment solutions make it possible to mount temporary edge protection on most bridge structures.
In building constructions that consists of wooden beams, the Wood beam clamp can be used as attachment for the edge protection. The bracket has integrated post lock and fits beam dimensions of 45 x 120 – 220 mm. It is designed for a flexible mounting and can be easily adjusted as needed. When the bracket has been mounted on the beams, then Post 1,3 m and Barrier 2,6 are mounted. Post foot and Clamp 550 are examples of other brackets that can be used on some bridge constructions. Posts are then mounted in the brackets and after that barriers.
PRODUCTS
• Wood beam clamp
• Post foot
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6
Adjustable post holder is used when the edge protection needs to be adjusted to different locations during the course of a project. The holder is part of SafetyRespect’s Hall system which is an edge protection developed for flat roofs and gently inclined roofs. Such an example is constructions for industry, sports and commerce.
A starting position can be set during roofing and the adjustment is easily done when wall elements are to
be mounted, or when working with crown lights, hangers etc. The possibility of adjustment allows the safety to be maintained at the same high level throughout the construction process.
• Hot dip galvanized.
• Weight 7,9 kg.
Art. no. 911126
TrailerSafe working platform from SafetyRespect is an easy to use, complete solution for fall protection while loading and unloading goods. TrailerSafe is tested and approved both as a scaffold and as an anchor point for personal fall protection for a maximum of two people.
SafetyRespect’s working platform TrailerSafe has a flexible and modular design, which works
just as well in crowded city environments as on open areas at a construction site. TrailerSafe has overhead anchor points for the personal fall protection. With the rollable trolleys it is easy to move along the entire length of the platform.
The working platform can be adjusted in height to suit different situations, and is pushed out which makes it easy to park the truck close. TrailerSafe can also provide fall protection over longer distances by connecting multiple units. With TrailerSafe, you get a complete and flexible solution where we can help you adapt the platform to your wishes. Assembly is quick and included in the delivery.
• Type approved as scaffolding (EN 12811), max 150 kg/m2.
• Tested and approved as an anchor point for personal fall protection for 2 people (EN 795, TS 16415).
• Overhead anchor point, 7 meters above the ground.
• Adjustable working platform.
• Extendable system for longer distances.
• Moveable when using forks.
• Compact transport and storage mode.
• Stairs with railing, for one or two sides.
• Delivered with assembly included.
• Automatic rescue function as an option.
SPECIFICATIONS
Length: 6 m (excl. stairs)
Height: 7,3 m
Depth: 1,3 m
Height work platform: 1,1–1,5 m
Max working height: 4,5 m
Weight TrailerSafe: 1500 kg
Weight ballast: 3000–5000 kg
Product sheet
Product sheet
