Category: Personal fall protection

Scissorsafe anchor for personal fall arrest protection

Scissorsafe fall arrest anchor

Scissorsafe anchor for personal fall arrest protection

Scissorsafe is an anchorage system designed specifically to prevent falls from height during the construction of concrete structures. This personal fall protection anchor is unique because it deploys into concrete voids that are cast using Scissorsafe void formers (product code SSAN002).

A Cast-in anchor system incorporated into the design of the structure offers safety and economical benefits by removing the need to drill for anchor points or load-test friction reliant anchors before a safety system can be connected to them. Anchor points are a vital part of a personal fall protection system. they are the critical component that connect Lifelines, Lanyards, Fall Arrestors and Rescue Kits to the permanent structure.

Scissorsafe anchorage points are created by nailing a two part plastic mould insert onto the horizontal formwork which when removed reveals overhead anchorage points. Scissorsafe anchor tools have a unique mechanical action that opens within the concrete void and is locked by the karabiner on the connecting device.

Scissorsafe anchorage devices are economical as they are reusable throughout the project. Concrete drilling is eliminated reducing working at height, dust, noise and time. The system is certified to BS EN795 class B- portable anchorages, independently assessed under strict conditions to comply with the requirements of European Conformity.

Product code SSAN002

Scissorsafe fall arrest anchor - Personal fall protection device for construction workers UK

Scissorsafe personal fall protection

Installing compression posts and safety barriers with Scissorsafe personal fall protection system

Scissorsafe work restraint system fall protection

Scissorsafe work restraint system - Personal fall protection

 

 

Personal fall protection construction kit

Construction kit

Personal fall protection construction kit
With our Construction kit, you get light, convenient fall protection designed for work on slabs or roofs with flat surfaces.

The kit contains a fall protection harness that is easy to put on and take off and is light and easy to work in. The fall arrest block included has a 6 meter long steel line to enable you to move over larger surfaces without needing to change the anchor point. The block is certified for both horizontal and vertical work as well as work on sharp edges. The kit also includes a carabiner and a 1 meter steel sling. The products are supplied in a sturdy, water-resistant bag that can be carried on the back.

CONSTRUCTION KIT
Art. no. 967310
Harness SR Body
Block SR IKAR steel 6 m
Carabiner alu, oval 26 kN ozone black triplock
Lanyard steel I 100 cm 15 kN
Gear bag 35 l SR

Product sheet

construction kit SafetyRespect

Personal fall protection mobile platform kit

Mobile platform kit

Personal fall protection mobile platform kit
For those who work on a mobile platform, we have tailored a fall protection kit that provides great flexibility and freedom of movement.

Since a platform has a limited work surface, there are no long lines needed for anchoring. This kit includes a fall arrest block with a 1,8 meter long band with a fall indicator. The fall arrest block is certified for both horizontal and vertical work as well as work close to sharp edges.

The harness included is easy to put on and take off and is light and easy to work in. The kit also includes a carabiner hook and a 0,6 meter anchor sling. The products are supplied in a heavy duty, water-resistant bag that can be carried on the back.

MOBILE PLATFORM KIT
Art.nr. 967300
Harness SR Body
Block SR IKAR textile 1,8 m
Carabiner alu, oval 26 kN ozone black triplock
Sling 60 cm, 22 kN
Gear bag 35 l SR

Product sheet

mobile platform kit safetyrespect

Scissorsafe void former

The Scissorsafe Void Former is an expendable plastic cast-in component used to form anchorage points in precast or insitu poured concrete. The void former consist of two parts. A 35 mm diameter circular disk is nailed or screwed to horizontal formwork in pre-designed locations. After that a tee shaped mould is pushed firmly onto the disk to form an inverted void in the concrete.

Scissorsafe anchors are inserted and deployed in this void when fall arrest or work restraint anchorage is required. The unique nature of this anchorage system means that the anchor isn’t relying own friction to support the fall arrest system connected to it. Upon completion of the structure, Void formers can be closed off with grout or covered with a Scissorsafe plastic cover cap. These are generally used to disguise void former holes when the anchorage point is to be used for maintenance or repair work.

Porter tool holder

Tool hook Porter

Porter tool holder
Plastic holder for construction and industrial tools on the harness.
  • Easy clipping and un-clipping.
  • The nose on the upper part allows to set away some staff in order to access staff on the bottom.
  • Rubber part fixes the Porter on place and prevent it from rotation.

Art. no. 965091

Product sheet

Tool holder

Tool holder strap

Tool holder
Elastic sling to attach the tools to the harness which makes the loss of the tool impossible.
  • Designed to provide comfortable work while working with the tools at heights.
  • High durability and flexibility.
  • Steel welded eye.
  • Length of the sling can be extended up to 130 cm.

Art. no. 965092

Product sheet

Snake brace

Snake brace

Snake brace
Anchor point for through holes, designed to function as a link between the structure and the fall arrest, work positioning, rope access or rescue systems.
  • Intended for through holes whose minimum and maximum diameter corresponds to the type of Snake Brace in relation to the actual thickness of the current structure.
  • The opening need not be entirely regular but the minimum diameter must be flat; there must be a minimum space for installation behind the hole.
  • Intended for a single user.
  • The maximum strength can be used only if the structure in which the anchor hole is located can withstand the load in all directions.
  • The minimum strength of the construction should be designed according to EN 795 (if not in accordance with EN 795, the load bearing capacity may be reduced).
  • Snake Brace can be loaded in any direction only if also allowed by the construction in which is anchored.

Art. no. 967065

Product sheet

USER MANUAL
Snake brace

slings black

Slings 22 kN

slings black
Anchor slings for personal fall protection.

• Strenght 22 kN.
• Four lengths 60, 80, 120, 150 cm (24, 32, 47, 60 inches).
• Width 16 mm.
• EN 566, CE 1019.

60 cm Art. no. 967071
80 cm Art. no. 967072
120 cm Art. no. 967073
150 cm Art. no. 967074

Product sheet

USER MANUAL
Slings, 22 kN