Hall system

Edge protection on hall construction

SafetyRespect Hall system is an edge protection developed for flat or low inclined roofs, for example constructions for industry, sports and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of aluminum barriers and smart components that offer rapid and safe installation.

Hall constructions have a relatively short construction process. That is why it is important that the edge protection is pre-planned, adjustable, can be quickly installed and offers satisfactory protection during the whole building process. The system is developed to suit the different types of work carried out.

The system creates a safe working site when installing load-carrying sheets, roof insulation, waterproof layer, etc. Wall panels and facade elements can be installed with the edge protection in place. The flexibility both in height and sideways, offers solutions that traditional edge protection does not have. The edge protection can be adjusted/swivelled, which enables installation of gutters and similar devices at the eaves. The aluminum barriers are attached to posts with the post locking and are jointed continuously with pipe joints or couplings.

The edge protection is attached on the outside of the columns. Welding nuts are delivered to the manufacturer of the framework and welded onto the steel columns. The positioning of welding nut is designed in consultation with SafetyRespect. When the edge protection is installed on the columns the working area is totally free to be used for all other work, such as placing the load-carrying sheets, roof insulation, waterproof layer, etc. No damage is thus done to already finished surfaces. The welding nuts are covered by the pilasters between the facade panels when they are installed.

Product sheet

Edge protection on hall construction

Edge protection hall building

Edge protection on hall roof