The VT Post Extensions are used to increase the length of posts when the structural conditions require it. The lower part, equipped with the Easy Snap locking mechanism, snaps into the post holder of the attachment and offers the possibility of post fixing with the post holder welded on above.
• 5030425
• 1.3 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 535 x 40 x 40 mm
The VT Post Extensions are used to increase the length of posts when the structural conditions require it. The lower part, equipped with the Easy Snap locking mechanism, snaps into the post holder of the attachment and offers the possibility of post fixing with the post holder welded on above.
• 5030240
• 0.9 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 350 x 40 x 40 mm
The VT Hinge connects two steel barriers together. Thanks to the hinge, it can be done without one of two posts and one of two post holders for a corner cladded with edge protection.
• 1100023
• 0.6 kg
• electrogalvanised
• 316 mm
The VT Foot is used to hold an edge protection post on all flat surfaces, e.g. in-situ concrete ceilings. This horizontal attachment can be fastened with various screws and anchors.
• 5040001
• 1.1 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 195 x 130 mm
The VT Edge 100 is mainly used to reliably secure the edges of stairs. The cantilever of the post to be used is 100 mm and therefore enables work to be carried out safely on the stairs.
• 5040005
• 1.7 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 300 x 140 mm
Clamping widths of 50-600 mm and easy to adjust by hand and with a hammer. The clamp has three options for holding posts.
• 5040021
• 5.8 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 730 x 240 mm
This clamp is used to attach standard edge protection to sheet pile profiles, trench shoring panels and HEB beams. Clamping width up to 150 mm and easy to mount. Tightening using a hammer.
• 5040034
• 4.8 kg
• EN 13374, class A
• galvanized
• 330 x 249 x 180 mm
The VT barrier holder is used for stepless height adjustment of the different steel barriers. The locking screw allows the respective steel barriers to be fixed at the respective height.
• 919022
• 0.6 kg
• EN 13374, class A
• hot-dip galvanised
• 172 x 60 x 40 mm
The VT Balcony can be mounted directly on the brickwork or on the balcony and is used to hold an edge protection post. The two attachment points prevent the post holder from swinging out in any situation.
• 5040023
• 1.4 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 200 x 120 mm
The Euro Box is a standardized means of transportation for the safe transport of goods.
• 6010003
• 70 kg
• EN 13626
• painted
• 1240 x 840 x 970 mm
