Category: Concrete casting

Concrete casting in site

Casting in site

Concrete casting in site

With a structure framework cast-in-site there is the possibility of designing attachment points for the edge protection. Socket w rebar with integrated post lock, for example, can be cast into the wall tops in, for instance, house gables, lift- and stair shafts. After this Post 1,3 m and Barrier are installed. Vertical brackets can be installed on the formwork as attachments, followed by Post 1,3 m and Barrier.

In order to be able to build external panel walls from inside the slab Balcony bracket 10 degrees can be installed as an attachment, which gives an inclination of the edge protection by approximately 10 degrees. For other requirements of edge protection such as stairs, window openings, etc., there are several solutions that can be designed and cast in order to facilitate installation of edge protection and to create safer working sites.

PRODUCTS
• Socket w rebar
• Balcony bracket 10 degrees
• Balcony bracket
• Vertical bracket
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6

casting_in_site_safetyrespect_04

socket_w_rebar_safetyrespect_0203

At the wall tops Socket W Rebar, with integrated post lock can be cast as attachments for edge protection.

Attachment to columns for free working space

hall_system_safetyrespect_0035

Using available columns to attach edge protection creates a free surface on the slab, which is good for work tasks like casting etc. Barrier alu 3 m can handle large spans and makes installations between columns like these possible. The barriers will be suspended on the columns above the working surface at a correct height, and they are continuously jointed with Pipe joint or Pipe coupling without using any attachment on the slab.

PRODUCTS
• Barrier alu 3 m
• Joint pin
• Attachment

hall_system_safetyrespect_0025

Concrete casting on slab structures

When casting on top of concrete slab structures where Socket base, Post and Barrier are used on the slab it is an advantage to use casting protection. The Barrier can be raised on the post in several steps up to 310 mm with maintained safety as the post locking is fully functional. The Cast protection protects the Socket base against concrete scrap from the casting process.

PRODUCTS
• Socket base
• Post 1,3 m
• Cast protection for Socket base
• Barrier 1,3, 1,95, 2,6

cast_protection_safetyrespect_2cast_protection_safetyrespect_1