Tag: steel

Slab edges

slaps_safetyrespect_0115

Slab edges are present everywhere and are a common cause of fall accidents. Temporary edge protection can be installed on the slab or on the outside of the slab edge. If there are columns, they can be an alternative attachment of the edge protection.

Our solutions can easily be installed on all materials and provide flexibility when needed, as, for example, when walls are to be installed. Usually Socket base is installed at the slab edge for attaching the edge protection. The Post 1,3 m are installed in the socket base then barriers are attached.

When the barrier is in its lowest position it seals against the slab, and it can easily
be raised on the post for various kinds of work at the slab edge.

PRODUCTS
• Socket base
• Post foot
• Vertical bracket
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
• Barrier bracket 360

standard_system_0018

standard_system_safetyrespect_0136c

standard_system_safetyrespect_0114c

standard_system_safetyrespect_0112

standard_system_0119

concrete_slab_edges_safetyrespect_0136

standard_system_safetyrespect_0129

Side plate 140x140

Side plate 140×140

Side plate 140x140

Side plate is used when attaching brackets for temporary safety barriers on hall buildings. SafetyRespect Hall system is an edge protection developed for flat roofs and gently inclined roofs. Such an example is constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.

Art. no. 914155

Product sheet

Edge protection on hall roof

 

Centre plate 140x140

Centre plate 140×140

Centre plate 140x140

Centre plate is used for attachment of Hall System as edge protection on hall constructions.

Art. no. 914154

Product sheet

Hall system edge protection with adjustable post holder

Weld nut

Weld nut 20

Weld nut

Weld nut 20 is used for attachment of Hall system as edge protection on steel constructions. The system is developed for flat roofs and gently inclined roofs, such as building constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.

Weld nut 20
Art. no. 914148

Weld nut cylindrical
Art. no. 914147

Product sheet Weld nut 20

Attachment fall protection steel

Lanyard steel

Lanyard steel I 15 kN

Lanyard steel
Steel connecting and anchoring device for personal fall protection.

• Both ends finished with a fixed eye.
Combination of very good strength and durability.
Ideal for pruning trees or welding at height.
Available in three lengths.

100 cm Art. no. 967041
130 cm Art. no. 967042
180 cm Art. no. 967043

Product sheet

USER MANUAL
Lanyard Steel I, 15 kN

Clamp for edge protection on steel structure

Clamps on steel beams

Clamp for edge protection on steel structure

On steel beams with a flange a Steel beam clamp can be installed in order to quickly create an attachment for the edge protection. This creates a free surface on the slab that can be used for other work tasks. The clamp is designed with gripping jaws for the steel beam profile. The steel beam clamp has an integrated attachment for the post. Barrier 2,6 is installed directly onto the post lock and its height can easily be adjusted in order to facilitate different work tasks.

PRODUCTS
• Steel beam clamp

• Post 1,5 m alu
• Barrier bracket wedge coupler
• Barrier 1,3, 1,95, 2,6

steel_beam_clamp_safetyrespect_5399

steel_beam_clamp_safetyrespect_5412steel_beam_clamp_safetyrespect_1

Pre-installed attachments on steel beams

beams_and_columns_safetyrespect_0075

When steel beams are used in the building construction a Welding socket with integrated post lock should be designed as an attachment of edge protection. In these cases the Welding socket is welded according to the instructions when producing the steel beams. When the beam has been lifted in place Post 1,3 m and Barrier 2,6 are mounted. The attachment of the edge protection will become both safer and faster with a pre-fabricated attachment such as this one.

PRODUCTS
• Welding socket
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6

Pre-installed attachment on steel beams

beams_and_columns_safetyrespect_0075

When steel beams are used in the building construction a Welding socket with integrated post lock should be designed as an attachment of edge protection. In these cases the Welding socket is welded according to the instructions when producing the steel beams. When the beam has been lifted in place Post 1,3 m and Barrier 2,6 are mounted. The attachment of the edge protection will become both safer and faster with a pre-fabricated attachment such as this one.

PRODUCTS
• Welding socket
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6

Edge protection installation on steel beams

Edge protection installation on steel structures

Welding socket for installing edge protection

Edge protection on steel structure

Threaded attachments on steel

Edge protection on steel structure

For steel structures we can provide adapted edge protection solutions with various pre-fabricated attachments. Making of holes and threading, or mounting of Threaded welding plates, can be carried out when manufacturing the steel beams. If the Flex facade bracket is used the distance of the edge protection to the slab edge can be adjusted, for example when installing walls, windows and more. For protection near the edge, the Balcony bracket or Vertical bracket can be a suitable solution. All these solutions creates a free working space on the slab.

PRODUCTS
• Threaded rods
• Facade bracket
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6

Facade bracket for attaching edge protection steelflex_facade_bracket_safetyrespect_1

Steel beam clamp

On steel beams with a flange a Steel beam clamp can be mounted in order to quickly create an attachment for temporary edge protection. Using steel beam as attachment creates a free surface on the slab and can be used for other work tasks. The safety barriers will then be positioned outside the working space. The clamp is designed so that is has jaws that grip the steel beam profile. The steel beam clamp has an integrated attachment for posts. Barriers are installed directly onto the post lock and its height can easily be adjusted in order to facilitate different work tasks.

• Grips steel beams and posts with flanges up to 300 mm.
• Integrated post bracket.
• Robust and durable thread.
• Hot dip galvanized.
• Weight 6,3 kg.

Art. No. 912209

 

Product sheet

Temporary edge protection on steel beams

steel_beam_clamp_safetyrespect_5399

steel_beam_clamp_safetyrespect_5412

steel_beam_clamp_safetyrespect_013