Block foot is used as ground support for our Guard rail system. Multiple holes for flexible
placement of guard rails. The Guard rail system is a stable, robust and fast mounted system for blocking and temporary enclosures, designed to meet demanding environments.
• Cut outs for toe board.
• Composit material.
• Weight 15 kg.
Art. no. 983203
Fence for blocking and temporary enclosures at construction sites, traffic environments, events etc. The system is designed with integrated hooks and loops for ergonomic and cost-effective handling. The fence is hot dip galvanized, designed to meet demanding environments and can be placed in several angles. We also offer custom profiling with powder coating in desired color and logotype. Weight 16 kg, 19 kg, 23 kg.
PRODUCT OVERVIEW
Hot dip galvanized:
• Fence 1,8 m art. no. 983141
• Fence 2,5 m art. no.983142
• Fence 3,2 m art. no. 983143
Galvanized and powder coated:
• Fence 1,8 m art.no. 983151
• Fence 2,5 m art.no. 983152
• Fence 3,2 m art.no. 983153
Accessories:
• Flat foot art.no. 983201
• Angle foot art.no. 983202
• Block foot art.no. 983203
• Toe board holder art.no. 983401
When you want to create a safe platform/working deck in a lift shaft you should use Platform consoles that are fastened to the inside of the shaft wall. When the platform consoles have been installed, grade timber of correct dimensions should be used to create the platform level.
• Bracket that creates flats at openings and shafts.
• Installed with console tenon.
• Maximum load 1,000 kg/console.
• Weight 1,4 kg.
Art. No. 930089
Compression post is used as for installing edge protection between concrete slabs and other situations at construction sites. Utilizing the Compression post together with Barrier and Containment net a fully covered opening can be achieved. The containment net stops debris and material from entering or exiting the floor and the Barrier acts as collective fall protection. The Compression post is easy to install by extending the inner pipe to the ceiling and then activating the compression function by a foot pedal.
PRODUCTS
• Compression post 2,2-3,5 m
• Frame barrier holder
• Barrier 1,3, 1,95, 2,6
• Barrier bracket 360
Compression post is used as for installing edge protection between concrete slabs and other situations at construction sites. Utilizing the Compression post together with Barrier and Containment net a fully covered opening can be achieved. The containment net stops debris and material from entering or exiting the floor and the Barrier acts as collective fall protection. The Compression post is easy to install by extending the inner pipe to the ceiling and then activating the compression function by a foot pedal.
• Tool free installation.
• Adjustable length 2,2-3,5 m (7’2”-11’5”).
• Tension load (FT) 100-150 kg.
• Fits with various barrier brackets.
• Hot dip galvanized.
• Weight 10,5 kg.
• EN 13374 A, OSHA 1926.502 (B).
• Delivered 50 pcs in stackable pallet.
Art.no. 913151
Joint pin barrier is used for jointing Barrier alu 3 m, as temporary edge protection on hall buildings. SafetyRespect Hall system is an edge protection developed for flat roofs and gently inclined roofs. Such an example is constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.
Art. No. 914150
Barrier alu 3 m is used when installing Hall system as temporary edge protection on hall building constructions. SafetyRespect Hall system is an edge protection developed for flat roofs and gently inclined roofs. Such an example is constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.
• Can easily be raised and lowered on the posts.
• Stable frame construction of 48,3 mm aluminium pipe.
• Integrated toe board 225 mm.
• Weight 22 kg.
• 14 pieces delivered in stacking stillage.
Art. No. 910122
Side plate is used when attaching brackets for temporary safety barriers on hall buildings. SafetyRespect Hall system is an edge protection developed for flat roofs and gently inclined roofs. Such an example is constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.
Art. no. 914155
Centre plate is used for attachment of Hall System as edge protection on hall constructions.
Art. no. 914154
Weld nut 20 is used for attachment of Hall system as edge protection on steel constructions. The system is developed for flat roofs and gently inclined roofs, such as building constructions for industry, sports, events and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of safety barriers of aluminium and smart components that offer rapid and safe installation.
Weld nut 20
Art. no. 914148
Weld nut cylindrical
Art. no. 914147
Product sheet
